Part Number Hot Search : 
1A470 01200 TA58L10F QPF9N50C AQ111 45M75B3 1N5255B 033200
Product Description
Full Text Search
 

To Download HVI102-490 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 H HiTRON
UNIVERSAL INPUT AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI102 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES LOW-PROFILE U-BRACKET FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Range typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: V-M connector. Input Frequency: 47-63Hz. Inrush Current: 30.6A peak @230Vac. Input Current: Typ. 1.8A @115Vac, 0.8A @230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 11mS @115Vac, 60mS @ 230Vac. Power Fail Signal: Installed. Earth Leakage: Less than 0.4mA @230Vac.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: V-M connector. Output Wattage: Typ. 100 watts. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. 1-2%. Aux.VO2/VO3/VO4 typ. 3-5% (Common choke). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output. UVP: Built-in at main output. Remote Sensing: Installed in main output VO1. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Operating Temperature: 0 to +50 C under forced air flow for full load. Storage Temperature: -20 to +85C. Temperature Coefficient: Typ. 0.04%/C. Cooling: At least 25 cfm direct forward air flow is required to achieve full rating power. Construction: U-bracket format.
GENERAL SPECIFICATION
Efficiency: Typ. 80-82%. Switching Frequency: 63K Hz. Circuit Topology: Fixed frequency forward circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 4.10Watts / Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
For the details of safety approval, please consult the factory.
-29-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO. HVI102-19 HVI102-10 HVI102-11 HVI102-12 HVI102-13 HVI102-13B HVI102-14 HVI102-15 HVI102-16 HVI102-17 MAIN VO1 Typ. 25.0A 20.0A 8.5A 6.8A 4.2A 3.0A 3.6A 2.8A 2.0A 1.3A @# Volt. 3.3V 5.0V 12.0V 15.0V 24.0V 24.0V 28.0V 36.0V 48.0V 58.0V
DUAL OUTPUT
MODEL NO. HVI102-20 HVI102-21 HVI102-22 HVI102-23 HVI102-23E HVI102-24 HVI102-25 HVI102-290 HVI102-291 HVI102-292 HVI102-293 AUX. +VO2 Typ. Volt. 3.4A +12.0V 3.4A +12.0V 1.5A +24.0V 2.5A +15.0V 4.0A +5.0V 3.4A +12.0V 2.8A +15.0V AUX. +VO2 Typ. Volt. 3.0A +12.0V 3.0A +12.0V 1.5A +24.0V 2.5A +15.0V 1.5A +24.0V 1.5A +24.0V 3.0A +12.0V 7.5A +3.3V 4.0A +5.0V 2.5A +15.0V 4.0A +5.0V 3.0A +12.0V 2.5A +15.0V 1.5A +24.0V 1.0A +5.0V 1.1A +5.0V MAIN VO1 Typ. 10.0A 10.0A 10.0A 10.0A 7.5A 4.0A 3.4A 10.0A 12.0A 12.0A 12.0A @# Volt. +5.0V +5.0V +5.0V +5.0V +6.5V +12.0V +15.0V +3.3V +3.3V +3.3V +3.3V AUX. VO2 Typ. Volt. 10.0A -5.0V(+) 4.0A -12.0V(+) 3.0A -15.0V(+) 2.0A -24.0V(+) 2.0A -24.0V(+) 4.0A -12.0V(+) 3.4A -15.0V(+) 10.0A -5.0V(+) 4.0A -12.0V(+) 3.0A -15.0V(+) 2.0A -24.0V(+) MODEL NO. (HVI102-20P) (HVI102-21P) (HVI102-22P) (HVI102-23P) (HVI102-23EP) (HVI102-24P) (HVI102-25P) (HVI102-290P) (HVI102-291P) (HVI102-292P) (HVI102-293P)
TRIPLE OUTPUT
MODEL NO. HVI102-30 HVI102-31 HVI102-32 HVI102-33 HVI102-390B HVI102-393 HVI102-394 MAIN +VO1 Typ. 10.0A 10.0A 10.0A 10.0A 18.0A 12.0A 12.0A MAIN +VO1 Typ. 10.0A 10.0A 10.0A 10.0A 10.0A 3.0A 12.0A 10.0A 12.0A 12.0A 12.0A 12.0A 12.0A 12.0A 7.0A 15.0A
"@" Adjustable.
@# Volt. +5.0V +5.0V +5.0V +5.0V +3.3V +3.3V +3.3V @# Volt. +5.0V +5.0V +5.0V +5.0V +5.0V +5.0V +3.3V +5.0V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V
AUX. -VO3 Typ. Volt. 0.6A -12.0V 0.6A - 5.0V 0.6A -12.0V 0.6A -15.0V 1.0A +12.0V 0.6A -12.0V 0.6A -15.0V AUX. -VO3 Typ. Volt. 0.60A -12.0V 0.60A -5.0V 0.60A -12.0V 0.60A -15.0V 0.50A -15.0V 0.50A -15.0V 0.60A -12.0V 0.25A -12.0V 0.60A -12.0V 0.60A -15.0V 0.60A -15.0V 0.60A -12.0V 0.60A -15.0V 0.60A -12.0V 1.00A -5.0V 1.25A -48.0V AUX. VO4 Typ. Volt. 0.60A 12.00V 0.60A 5.00V 0.60A 12.00V 0.60A 12.00V 0.50A 15.00V 0.50A 15.00V 0.60A 5.00V 0.25A 12.00V 0.60A 12.00V 0.60A 5.00V 0.60A 15.00V 0.60A 12.00V 0.60A 12.00V 0.60A 12.00V 2.50A 24.00V 0.30A 6.25V
QUAD OUTPUT
MODEL NO HVI102-40 HVI102-41 HVI102-42 HVI102-43 HVI102-44 HVI102-44E HVI102-490 HVI102-490E HVI102-490B HVI102-491 HVI102-491B HVI102-492 HVI102-493 HVI102-494 HVI102-495 HVI102-496E
Symbol: "" OVP built-in.
"" Remote sensing.
"" Coupled choke. "" Installed with Post Regulator.
"" Floating(or isolated)output.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 448.5g (15.82 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT ASSIGNMENT CONNECTOR & PIN # AC-L P1-L AC-N P1-N AC-G P1-G SINGLE OUTPUT VO1 DC-COM VO1 DUAL OUTPUT VO2 P2-8,9 DC-COM VO1 TRIPLE OUTPUT VO2 P2-8,9 VO3 DC-COM VO1 VO2 P2-8,9 QUAD OUTPUT VO3 +VO4 -VO4 P2-11 P2-14 P2-13 DC-COM P2-4,5,6,7 -S ASSORTED SIGNAL +S P.F.S. P3-2 P2-12 P2-1,2,3,4,5 P2-6,7,8,9,10,11 P2-1,2,3 P2-4,5,6,7,10,13 P2-1,2,3 P2-11 P2-4,5,6,7,10,13 P2-1,2,3 P3-1
Mating connector: P1,2,3 Molex # 5195 or 5239 series.
-30-


▲Up To Search▲   

 
Price & Availability of HVI102-490

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X